Canon Pixma iP3000 Driver & Software Download

Canon Pixma iP3000 Driver & Software Download-Canon printers include well-known printer brands and many are the choice of printer users in Indonesia in addition to Epson and HP brands. In addition to the relatively cheap price canon printers also have good quality and not inferior to other brand printers. That's what makes a lot of people prefer canon in buying a printer. But apart from the advantages possessed canon printers also have some diseases that often occur. let's look at some canon printer diseases and their solutions in the explanation below.

If you are a faithful user of Canon printers, and experience some problems with your printer on this one. Consider a few canon printer diseases and the following solution.

1. Blinking, Indicator Flickering when Printer is turned on

Usually this disease strikes Canon iP1200, iP1300, iP1600, iP1700, i255,

The Lightweight Solution means that this solution should be done every time you turn on the printer, because this step is only temporary. When your printer is disconnected from an electric current, then blinking will reappear. But, there is no harm in doing this step, if you are not familiar with how to reset the printer using the software.

Disconnect the power cable from your printer.

Press and hold the Power button, while you reinstall the power cable.

The power indicator will appear bright yellow.

Release the power button, when you finish installing the power cable.

Then press the power button again, to turn on your printer.

Make sure your printer is not blinking anymore. But when your printer is disconnected from the electric current, then this blinking will appear, and you just repeat the above steps.

Software Solutions, you can overcome this blinking disease using GeneralTool software, search it on google and dowload softwarenya, many kok. specifically for iP 1300 and iP 1700. By using this software, blinking can usually be fixed permanently, meaning you do not need to repeat as in the above lightweight solution.

2. Blinking, blinking when out of ink, or when finished ink

Usually this disease hit the Canon iP 1880 printer, and occurs when the ink runs out or when you finish filling ink. Or even ink has not been exhausted, but this blinking often hit iP 1880. One of the Solution:

Press and hold the "Resume" button for approximately 1 to 2 minutes

Then open the cover or cover of your printer.

First open the Cartridge then plug it in again

Close the cover of the printer

Turn it off, then turn it back on

3. The printed letter is dashed (streaked), uneven

Try cleaning several times, if this does not work too, you clean your catrige manually. But, the best solution, based on the experience of some users, is the time to replace your printer Catrige.

4. Overcoming "ink absorber is full" on Canon IP1700 and IP1200

Turn off the printer and unplug the power cord

Press and hold the power button (do not disconnect) while then plugs back the power cable

When the power button is still pressed and the power cord is plugged back, press the resume button twice (consecutively)

Release the power button

Done

Now your computer will detect a new Printer, follow the steps requested until then new printer is installed.

5. Solution "The waste ink absorber is almost full" and "ink absorber is Full" on Canon IP3000 and IP2000

Turn off the printer

Press the resume button and then press the power button

Press and hold the power button and then release the resume button

Press the resume button 2 times in succession and then release both buttons (resume button and power button)

A green indicator will appear

When the indicator is green, then press the resume button 4 times

Press the power button, the printer will turn off, otherwise press power button again

The printer is back to normal.

Canon Pixma iP3000 Driver & Software Download

Windows 10 / Windows 10 (x64) / Windows 8.1 / Windows 8.1 (x64) / Windows 8 / Windows 8 (x64) / Windows 7 / Windows 7 (x64) / Windows Vista / Windows Vista (x64) / Windows XP / Windows XP (x64) / Macintosh / Mac OS X (10.5/10.6/10.7/10.8/10.9/10.10) / Linux.

Canon PIXMA iP3000 Printer Driver for Mac OS X 10.2/10.3/10.4/10.5 4.83 ⟹ Download
Canon PIXMA iP3000 CUPS Printer Driver (OS X 10.5/10.6) 10.51.2.0 ⟹ Download
Easy-PhotoPrint EX (OS X 10.4/10.5/10.6) 4.1.6 ⟹ Download
Canon PIXMA iP3000 Printer Driver For Windows 2000/XP (32-bit) ⟹ Download
Canon PIXMA iP3000 Printer Driver For Windows XP (64-bit) ⟹ Download
Canon Inkjet Printer Driver Add-On Module For Windows 7/Vista (32 x64-bit) ⟹Download
My Printer (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP) ⟹ Download
Easy-PhotoPrint EX (Windows XP x64) ⟹ Download
Easy-PhotoPrint EX (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)⟹ Download
Easy-PhotoPrint EX (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP) ⟹ Download
Easy-PhotoPrint EX (Windows XP x64)⟹ Download
My Printer Windows 2000 (32-bit) ⟹ Download
Easy-PhotoPrint EX Windows 2000 (32-bit) ⟹ Download
Easy-LayoutPrint For Windows 2000/Vista/XP (32 x64-bit) ⟹ Download
Printer User Guide for Windows users ⟹ Download

Driver Download or the Installation for Windows Operating System:

How to install the driver for Canon PIXMA iP3000:

1. First, you need to click the link provided for download, then select the option “Save” or “Save as”. Clicking “Save” is for downloading the file. Meanwhile if you choose “Run” or “Open”, the file downloaded will be automatically installed after the downloading process is completed.
2. For your information, the driver file that you download will be saved in a certain folder that you have set before, especially in the self-extracting form or (.exe format).
3. The last step is double clicking the downloaded file that has the format EXE file for the decompress process. Then, the installation will be automatically started.

How to uninstall the driver by using Control Panel.

Note: The following steps are for Windows 7. The different versions may have the different settings.

1. Come to the Start menu, then you need to choose Control panel --> choose the driver and click “Uninstall a Program.”
2. Wait until a page is appear with the list of the installed program. Then you need to double click the program that you want to uninstall.
3. At last, choose “Yes” and “Ok”. The uninstall process is completed.

Driver Download or Installation process for Mac Operating System:

How to install driver of Canon PIXMA iP3000 in Mac:

1. First, you need the file of the driver. When you have already completed the downloading process, it will be saved in the certain folder. You can see it at the computer settings.
2. Second, you need to double click the downloaded driver file and mount it on the Disk Image.
3. The third step is that you need to double click again the mounted Disk Image.
4. At last, double clicking the packaged driver file. Do not worry, the installation is about to be started automatically.

However, the step-by-step of the installation (and vice versa), it can be differed depend upon the platform or device that you use for the installation of Canon PIXMA iP3000.The above mentioned, the installation is occurred using Windows 7 and Mac for windows XP or windows 8 is not much different way.